
Using the SMF Player
| 2. Use the [+] and | |
Playing Back an SMF | ||
buttons to adjust the SMF volume. | ||
| You can specify a setting in the range of 000 | |
| ||
| (minimum) to 127 (maximum). |
To play back an SMF
1. Press the SMF PLAYER button to display the file selection screen.
This causes the SMF player pointer to appear on the display.
SMF are those whose file names end with the extension “MID”. An error message appears at this time if there are no SMF files currently in Flash Memory.
2.Use the [ ] and [
] CURSOR buttons or the [+] and
The name of the currently selected file appears in the text area of the display. The number area of the display shows the size of the file in kilobytes.
3.Press the START/STOP button.
This starts playback of the selected file.
The number area shows the number of the part to be played by hand.
You can use the TEMPO buttons to adjust the tempo within the range of 30 to 255.
You can turn channels 1 through 16 on and off, regardless of whether file playback is in progress or stopped. For more information, see “Turning Channels On and Off” on page
Pressing [+] and
Note that this setting does not affect the volume of the notes you play on the keyboard.
Configuring Other Settings
To configure other settings
1. Select the file you want to play back.
Perform steps 1 through 2 under “To play back an SMF” to select a file.
2.Press the [ ] CURSOR button to display a screen for selecting the part you want to play on the keyboard (play along part).
Use the [ ] and [
] CURSOR buttons or the [+] and
Press the MIXER button to enter the Mixer Mode.
Turn off the channel that corresponds to the play along part you selected above. See “Turning Channels On and Off” on page
4. To stop file playback, press the START/STOP button again.
Adjusting SMF Playback Volume
The following procedure explains how to control the overall volume of SMF data playback. You can adjust volume while playback is stopped or ongoing.
1. Press the ACCOMP VOLUME button.
This causes the “SMF Vol.” indicator to appear on the display, along with a value that indicates the current SMF volume setting.
Entering the SMF Player Mode initializes all parts by turning on all Mixer Mode channels.
After configuring Mixer Mode settings, press the MIXER button or EXIT button to return to the SMF Player Mode.
3. Press the [ ] CURSOR button to display the playback mode selection screen.
Use the [ ] and [
] CURSOR buttons or the [+] and
You can select from among the following four playback modes.
S1: One file, one time
SL: One file, repeat
A1: All files, one time
AL: All files, repeat
|