CTK691E01-01.book 92 ページ 2003年9月29日 月曜日 午後4時47分

DSP Algorithm List

4:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

19:Tri 2-Phase Chorus

ŠFunction

This is stereo chorus in accordance with triangular wave LFO.

ŠParameters

0:LFO Rate (Range: 0 to 127) Adjusts the rate of the LFO.

1:LFO Depth (Range: 0 to 127) Adjusts the depth of the LFO.

2:Feedback(Range: –64 to 0 to +63) Adjusts the feedback of the sound.

3:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

20:Stereo Delay 1

ŠFunction

This is delay of stereo input and output.

ŠParameters

0:Delay Time (Range: 0 to 127) Adjusts the delay time.

1:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

2:Feedback (Range: 0 to 127) Adjusts the repeat of the delay.

3:High Damp (Range: 0 to 127)

Adjusts damping of the high-range delay sound.

The smaller the value, the greater the damping of high-range delay sound.

4:Ratio L (Range: 0 to 127)

Adjusts the delay time of the left channel. Proportional to the value set for Delay Time.

5:Ratio R (Range: 0 to 127)

Adjusts the delay time of the right channel. Proportional to the value set for Delay Time.

21:Stereo Delay 2

ŠFunction

This is cross feedback delay of stereo input and output.

ŠParameters

0:Delay Time (Range: 0 to 127) Adjusts the delay time.

1:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

2:Feedback (Range: 0 to 127) Adjusts the repeat of the delay.

3:High Damp (Range: 0 to 127)

Adjusts damping of the high-range delay sound.

The smaller the value, the greater the damping of high-range delay sound.

4:Ratio L (Range: 0 to 127)

Adjusts the delay time of the left channel. Proportional to the value set for Delay Time.

5:Ratio R (Range: 0 to 127)

Adjusts the delay time of the right channel. Proportional to the value set for Delay Time.

22:3-Tap Delay

ŠFunction

This is left/center/right 3-tap delay.

ŠParameters

0:Delay Time (Range: 0 to 127) Adjusts the delay time.

1:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

2:Feedback (Range: 0 to 127) Adjusts the repeat of the delay.

3:High Damp (Range: 0 to 127)

Adjusts damping of the high-range delay sound.

The smaller the value, the greater the damping of high-range delay sound.

4:Ratio L (Range: 0 to 127)

Adjusts the delay time of the left channel. Proportional to the value set for Delay Time.

5:Ratio C (Range: 0 to 127)

Adjusts the delay time of the center channel. Proportional to the value set for Delay Time.

6:Ratio R (Range: 0 to 127)

Adjusts the delay time of the right channel. Proportional to the value set for Delay Time.

23:Gate Reverb

ŠFunction

This is a fader that creates artificial reverb that sounds like it is being cut with a gate.

E-92

705A-E-094A