CTK691E01-01.book 93 ページ 2003年9月29日 月曜日 午後4時47分

DSP Algorithm List

ŠParameters

0:LPF (Range: 0 to 127)

Adjusts the cutoff frequency of the low-pass filter.

A smaller value cuts the high range.

1:HPF (Range: 0 to 127)

Adjusts the cutoff frequency of the high-pass filter.

A larger value cuts the low range.

2:Feedback (Range: 0 to 127) Adjusts the repeat of the reverb.

3:High Damp (Range: 0 to 127)

Adjusts damping of the high-range delay sound.

The smaller the value, the greater the damping of high-range delay sound.

4:Diffusion (Range: 0 to 127)

Provides fine adjustment of the reverb.

5:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

6:Dry Level (Range: 0 to 127)

Adjusts the level of the original sound.

6:Dry Level (Range: 0 to 127)

Adjusts the level of the original sound.

25:Reflection

ŠFunction

This is an effector that extracts the first reflected sound from a reverb sound.

ŠParameters

0:Type (Range: 0 to 7)

Selects from among the eight available reflection patterns.

1:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

2:Feedback (Range: 0 to 127)

Adjusts the repeat of the reflected sound.

3:Tone (Range: 0 to 127)

Adjusts the tone of the reflected sound.

26:Flanger

ŠFunction

This is a flanger in accordance with a sine wave LFO.

ŠParameters

24 :Reverse Gate Reverb

ŠFunction

This is gate reverb with a reverse rotation effect.

ŠParameters

0:LPF (Range: 0 to 127)

Adjusts the cutoff frequency of the low-pass filter.

A smaller value cuts the high range.

1:HPF (Range: 0 to 127)

Adjusts the cutoff frequency of the high-pass filter.

A larger value cuts the low range.

2:Feedback (Range: 0 to 127) Adjusts the repeat of the reverb.

3:High Damp (Range: 0 to 127)

Adjusts damping of the high-range reverb sound.

The smaller the value, the greater the damping of high-range reverb sound.

4:Diffusion (Range: 0 to 127)

Provides fine adjustment of the reverb.

5:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

0:LFO Rate (Range: 0 to 127) Adjusts the rate of the LFO.

1:LFO Depth (Range: 0 to 127) Adjusts the depth of the LFO.

2:Feedback (Range: –64 to 0 to +63) Adjusts the feedback of the sound.

3:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

27:Reverb

ŠFunction

This is an effector that preserves the breadth of a sound by adding a reverb sound.

ŠParameters

0:Tone (Range: 0 to 127)

Adjusts the tone of the reverb sound.

1:Time (Range: 0 to 127) Adjusts the reverb time.

2:High Damp (Range: 0 to 127)

Adjusts damping of the high-range reverb sound.

The smaller the value, the greater the damping of high-range reverb sound.

705A-E-095A

E-93