CTK691E01-01.book 42 ページ ２００３年９月２９日 月曜日 午後４時４７分

Mixer Function

zOctave Shift (Range: –2 to 0 to +2)

You can use octave shift to shift the range of the tone up or down. When using the piccolo tone, there may be cases when very high notes you want to play are not included within the range of the keyboard. When this happens, you can use octave shift to shift the keyboard range one octave up.

–2 :Range shifted two octaves down.

–1 :Range shifted one octave down.

0 :No shift

+1 :Range shifted one octave up.

+2 :Range shifted two octaves up.

Tuning Parameters

You can use these parameters to tune each of the parts individually.

zCoarse Tune (Range: –24 to 00 to +24)

This parameter controls the coarse tuning of the selected channel’s pitch in semitone units.

zFine Tune (Range: –99 to 00 to +99)

This parameter controls the fine tuning of the selected channel’s pitch in cent units.

Effect Parameters

The Mixer lets you control the effects applied to each individual part, making it different from the Effect Mode, whose settings are applied to all parts in general.

zReverb Send (Range: 000 to 127)

This parameter controls how much reverb is applied to a part. A setting of “000” turns reverb off, while a setting of 127 applies maximum reverb.

Š“Reverb Send” does not work with some drum sounds.

zChorus Send (Range: 000 to 127)

This parameter controls how much chorus send is applied to a part. A setting “000” turns chorus send off, while a setting of 127 applies maximum chorus send.

Š“Chorus Send” does not work with drum sounds.

zDSP Line (Settings: on, oFF)

You can use this parameter to turn DSP line off for a particular channel, or to turn it on.

DSP Part Parameters

zDSP Level (Range: 0 to 127) Sets the post-DSP volume.

zDSP Pan (Range: –64 to 0 to 63) Sets the post-DSP stereo pan.

E-42

705A-E-044A