main10.fm 41 ページ ２００３年１０月２９日 水曜日 午後２時１２分
| Mixer Function |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Use the [ ] and [ ] CURSOR buttons to |
|
|
|
|
|
|
How Parameters Work |
|
|
|
|
| |
select the parameter whose setting you want to |
|
|
|
|
| |
change. |
|
|
|
|
|
|
|
|
|
|
|
|
Example:
Select volume setting by displaying “Volume”.
Each press of the [ 
] or [ 
] CURSOR buttons cycles through the parameters.
The following are the parameters whose settings can be changed in the Parameter Edit Mode.
You can use the [ 
] and [ 
] CURSOR buttons to change to another channel at any time during this procedure.
1 Indicates channel volume of 127
Tone Parameters
zTone (Range: 000 to 803, Drawbar organ tones 000 to 199)
This parameter controls the tones assigned to each part. Anytime the tone is on the display, you can use the TONE button or DRAWBAR ORGAN button and then select a different tone, if you want.
4. Use the number buttons or [+] and
Example:
Change the setting to “060”.
Pressing the MIXER or EXIT button exits the parameter edit mode.
Editing DSP Channel Parameters
1. While Channel 16 is selected, press the [ ] CURSOR button.
This selects the DSP channel.
Pressing the [
] CURSOR button while the DSP channel is selected returns to Channel 16.
zPart On/Off (Settings: on, oFF)
This parameter can be used to turn each part on (sounds) and off (does not sound). The current on/off status of each part is indicated on the display as described below.
zVolume (Range: 000 to 127)
This is the parameter that controls the volume of the selected channel.
zPan Pot (Range:
This parameter controls the pan pot, which is the center point of the left and right stereo channels. Setting “00” specifies center, a value less than “00” moves the point left, and a value greater than “00” moves it right.
|