DSP Algorithm List
Parameters
0 : Resonance (Range: 0 to 127) Adjusts the resonance of the sound.
1:Manual (Range:
Adjusts the phaser shift volume, which is used for reference.
2:Rate (Range: 0 to 127) Adjusts the rate of the LFO.
3:Depth (Range: 0 to 127) Adjusts the depth of the LFO.
4:Wet Level (Range: 0 to 127)
Adjusts the volume level of the effect.
10:Phaser
Function
This is a monaural phaser that modulates the phase in accordance with a sine wave LFO.
Parameters
0:Resonance (Range: 0 to 127) Adjusts the resonance of the sound.
1:Manual (Range:
Adjusts the phaser shift volume, which is used for reference.
2:Rate (Range: 0 to 127) Adjusts the rate of the LFO.
3:Depth (Range: 0 to 127) Adjusts the depth of the LFO.
4:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
11:Rotary
Function
This is a rotary speaker simulator.
Parameters
0:Speed (Range: Slow, Fast)
Switches the speed mode between fast and slow.
1:Break (Range: Rotate, Stop) Stops speaker rotation.
2:Fall Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is switched from fast to slow.
3:Rise Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is switched from slow to fast.
4:Slow Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the slow speed mode.
5:Fast Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the fast speed mode.
12 :Drive Rotary
Function
This is an overdrive - rotary speaker simulator.
Parameters
0:Overdrive Gain (Range: 0 to 127) Adjusts overdrive gain.
1:Overdrive Level (Range: 0 to 127) Adjusts the output level of the overdrive.
2:Speed(Range: Slow, Fast)
Switches the speed mode between fast and slow.
3:Break (Range: Rotate, Stop) Stops speaker rotation.
4:Fall Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is switched from fast to slow.
5:Rise Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is switched from slow to fast.
6:Slow Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the slow speed mode.
7:Fast Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the fast speed mode.
13:Enhancer
Function
Enhances the outlines of the low range and high range of the input signal.
Parameters
0:Low Frequency (Range: 0 to 127)
Adjusts the low range enhancer frequency.
1:Low Gain (Range: 0 to 127)
Adjusts the low range enhancer gain.
2:High Frequency (Range: 0 to 127)
Adjusts the high range enhancer frequency.
|