
Mixer Function
Turning Channels On and Off
How Channel On/Off Works
Turning a channel off mutes any instrument recorded in the channel.
To turn channels on and off
1. Press the MIXER button.
This causes a pointer to appear on the display next to MIXER.
2.Use the [ ]/[
] CURSOR buttons to select a channel.
Example:
To select Channel 2.
1 Flash
This causes the upper three segments of the selected channel's level meter to flash.
The following describes what happens and what appears on the display when you turn a channel on or off.
zOn (on)
This setting turns on the currently selected channel, which is indicated by a bar appearing at the bottom of the level meter for that channel. This is also the default setting for all channels when the keyboard is turned on.
zOff (oFF)
This setting turns off the currently selected channel, which is indicated by the absence of the bar at the bottom of the level meter for that channel.
1On
2 Off
Using the Parameter Edit Mode
3. Press the [ ]/[ ] CURSOR buttons to display the on/off selection screen.
4. Use the
Example:
To turn the channel off.
Editing the Parameters for Channels 1 through 16
In the Parameter Edit Mode, you can change the settings of ten different parameters (including tone, volume, and pan pot) for the channel you selected on the Mixer screen.
To change parameters
1. Press the MIXER button.
This causes a pointer to appear on the display next to MIXER.
Press the [] CURSOR button to return to the channel selection screen.
Pressing the MIXER button returns to the Tone Screen.
The MIDI data display shows only the data for the channels selected with the Mixer.
2. Use the [ ] and [ ] CURSOR buttons to select the channel you want.
|