DSP Algorithm List
3:ER Level (Range: 0 to 127)
Adjusts the level of the initial reflection.
4:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
28
Function
This is left/right
Parameters
0:Delay Time (Range: 0 to 127) Adjusts the delay time.
1:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
2:Feedback (Range: 0 to 127) Adjusts the repeat of the delay.
3:High Damp (Range: 0 to 127)
Adjusts damping of the
The smaller the value, the greater the damping of
4:Ratio L (Range: 0 to 127)
Adjusts the delay time of the left channel. Proportional to the value set for Delay Time.
5:Ratio R (Range: 0 to 127)
Adjusts the delay time of the right channel. Proportional to the value set for Delay Time.
The following “Multi” algorithms are used in combination with the algorithms described above. Parameters are shared by both types of algorithms.
M00 :Multi00 (Sin
Function
This is a multi effector that is related to Sin
Parameters
0:Chorus LFO Rate
1:Chorus LFO Depth
2:Chorus Feedback
3:Chorus Wet Level
4:Delay Time
5:Delay Wet Level
6:Delay Feedback
7:Delay High Damp
M01 :Multi01
Function
This is a multi effector that is related to
Parameters
0:Chorus Rate 1
1:Chorus Depth 1
2:Chorus Rate 2
3:Chorus Depth 2
4:Chorus Wet Level
5:Delay Time
6:Delay Wet Level
7:Delay Feedback
M02 : Multi02 (Phaser –
Function
This is a multi effector that is related to Phaser –
Parameters
0:Phaser Resonance
1:Phaser Manual
2:Phaser Rate
3:Phaser Depth
4:Chorus Rate 1
5:Chorus Depth 1
6:Chorus Rate 2
7:Chorus Depth 2
M03 : Multi03 (Flanger –
Function
This is a multi effector that is related to Flanger –
Parameters
0:Flanger LFO Rate
1:Flanger LFO Depth
2:Flanger Feedback
3:Flanger Wet Level
4:Delay Time
|