CTK691E01-01.book 30 ページ 2003年9月29日 月曜日 午後4時47分

Applying Effects to Tones

3. Press the EFFECT or EXIT button.

4. Use the [+] and [–] buttons or the number

Š This returns to the tone or rhythm selection

buttons to select the equalizer type you want.

screen.

Š See the list on page A-18 for information about

 

the equalizer types that are available.

 

Example:

CHORUS Parameters

„Chorus Level (Range: 000 to 127) Specifies the size of the chorus sound.

„Chorus Rate (Range: 000 to 127)

Specifies the undulation speed of the chorus sound. A higher value produces faster undulation.

„Chorus Depth (Range: 000 to 127)

Specifies the undulation depth of the chorus sound. A higher value produces deeper undulation.

ŠWhether or not an effect is applied to the parts that are sounding also depends on Mixer Mode Reverb Send, Chorus Send, and DSP on/off settings. See “Mixer Function” on page E-39 for more information.

To select Jazz

ŠPressing the EXIT or EFFECT button exits the equalizer setting screen.

To adjust the gain (volume) of a band

1. After selecting the equalizer type you want, use the [ ] and [ ] CURSOR buttons to select the band whose gain you want to adjust.

Example:

To adjust the HIGH band

Using the Equalizer

This keyboard has a built-in four-band equalizer and 10 different settings from which you can choose. You can adjust the gain (volume) of all four equalizer bands within the range of –12 to 0 to +12.

To select the equalizer type

1. Press the EFFECT button so the pointer appears next to EFFECT on the display screen.

2. Press the [ ] CURSOR button three times.

ŠThis displays the equalizer editing screen.

3.Press the [ ] CURSOR button.

ŠThe equalizer type setting screen will appear automatically about fives seconds after you press the button.

2. Use the [+] and [–] buttons or the number buttons to adjust the band gain.

Example:

To adjust the gain to 10

ŠPressing the EXIT or EFFECT button exits the equalizer setting screen.

ŠChanging to another equalizer type causes the band gain settings to change to the initial settings for the newly selected equalizer type automatically.

E-30

705A-E-032A