CTK691E01-01.book 43 ページ 2003年9月29日 月曜日 午後4時47分

Mixer Function

zDSP System Reverb Send (Range: 000 to 127)

This parameter adjusts how much reverb is applied to all parts.

zDSP System Chorus Send (Range: 000 to 127) This parameter adjusts chorus.

ŠChanging the tone, volume, pan pot, coarse tune, fine tune, reverb send, or chorus send setting causes the corresponding MIDI message to be output from the MIDI terminal.

ŠChanging the tone settings changes the tone, octave shift, reverb send, chorus send, and DSP line* parameter settings.

* When DSP is off (See the note on page E-27).

ŠTurning on the Mixer’s DSP line parameter (page E-27) causes the settings of the DSP Pan, DSP System Reverb Send, and DSP System Chorus parameters to be used in place of the Pan Pot, Reverb Send, and Chorus Send parameter’s settings.

705A-E-045B

E-43