CTK691E01-01.book 61 ページ ２００３年９月２９日 月曜日 午後４時４７分

Song Memory Function

Level Meter Contents During Record/Edit Standby

Channels 11 through 16 correspond to Tracks 1 through 6.

Whenever the keyboard is in record or edit (page E-62) standby, the level meter display shows which tracks already contain recorded data and which are still empty. Tracks with four lit segments already contained recorded data, while tracks with one lit segment are not yet recorded.

1Recording track

2 Not recording track

Correcting Mistakes While Step Recording

Memory data can be thought of as a musical score that progresses from left to right, with the input point normally at the far right of the recorded data.

The procedure described here lets you move the input point to the left in order to make changes in data you have already input. Note, however, that moving the input point to the left and changing data automatically deletes all of the data recorded to the right of the input point.

To correct mistakes while step recording

1. Without exiting step recording, use the [ ] CURSOR button to move the input point to the left.

ŠThe REC indicator disappears from the display, and the STEP indicator flashes.

2. Monitoring the data on the display, use the [ ] and [ ] CURSOR buttons to move the input point to the data you want to change.

Example:

To re-record all note data following the note A3 located at Measure 120, Beat 1, Clock 0.

705A-E-063A

E-61