CTK691E01-01.book 51 ページ ２００３年９月２９日 月曜日 午後４時４７分

 

 

 

 

 

 

 

 

 

 

 

Registration Memory

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setup Names

 

To Save a Setup in Registration

 

You can assign setups into one of 32 areas, which you can

 

Memory

 

select using BANK buttons 1 through 4 and the four

 

 

 

 

 

 

 

 

 

 

1. Select a tone and rhythm, and otherwise set up

 

REGISTRATION buttons. Area names range from 1-1

 

 

through 8-4 as shown below.

 

 

 

 

 

 

 

 

 

 

 

 

the keyboard the way you want it.

 

 

 

 

 

 

 

 

 

 

 

 

Š See “Registration Memory Settings” on page E-50

 

 

 

 

 

 

 

 

 

 

 

 

for details on what data is stored in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

registration memory.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Use the BANK button or the number buttons to

 

 

 

 

 

 

 

 

 

 

 

select the bank you want.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Š If you do not perform any operation for about

 

 

 

 

 

 

 

 

 

 

 

 

five seconds after pressing the BANK button, the

 

 

 

 

 

 

 

 

 

 

 

 

display returns to the contents in step 1, above.

 

 

 

 

 

 

 

 

 

 

 

 

Š Bank 1 selected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. While holding down the STORE button, press a REGISTRATION button (1 to 4).

Š The following display appears when you press the 2 button.

1Use the BANK button to select the bank. Each press of BANK cycles through the bank numbers from 1 to 8.

2Pressing one of the REGISTRATION buttons (1 to 4) selects the corresponding area in the currently selected bank.

ŠWhenever you save a setup and assign it a setup name, any setup data previously assigned to that name is replaced with the new data.

ŠYou can use the keyboard’s MIDI capabilities to save your setup data to a computer or other external storage device. See “Using the Data Download Service” on page E-82 for details.

4. Release the STORE and REGISTRATION buttons.

ŠThe setup is saved as soon as you press a REGISTRATION button in step 3, above.

705A-E-053B

E-51