OTHER RECORDING FUNCTIONS

NOTE

•Selecting “Filter 1” records images with the monochrome, sepia, red, and purple filters.

•Selecting “Filter 2” records images with the green, blue, yellow, and pink filters.

•Selecting “Portrait” records a normal image, followed by an image with soft focus and enhanced flesh tones.

IMPORTANT!

•Note that you can use only one non-configurable variable at a time. You cannot use them in combination with each other.

Auto Bracketing Precautions

•Auto bracketing cannot be used when any one of the following conditions exists.

—When TIFF is selected for the image resolution (page 78)

—When “BULB” is selected for the shutter speed (pages 95, 96)

—During Coupling Shot, Pre-shot, or Soft Focus recording (pages 113, 117, 119)

•The flash is disabled while auto bracketing is being used.

•The Triple Self-timer (page 75) cannot be used together with auto bracketing.

•Take care not to move the camera until all of the shots (three or five) of the auto bracketing operation are recorded.

•The camera automatically performs a digital noise reduction process at shutter speeds slower than 1 second. Because of this, an auto bracketing operation that normally records five shots records only four shots at shutter speeds slower than 1 second.

•An auto bracketing operation may stop part way through if memory capacity or battery power runs low.

•Certain menu settings may be ignored when you use Auto Bracketing for recording.

110