OTHER RECORDING FUNCTIONS
3.Slide the battery holder back into the remote controller.
IMPORTANT! 
Before Using the Card Remote Controller for Recording
Be sure to perform the following steps before using the card remote controller for recording.
•Take care to ensure that the battery is not accidentally swallowed when it is removed from the remote controller. Particular care is required where young children are present.
•Keep this button battery out of the reach of small children. If swallowed accidentally, contact your physician immediately.
1.In a REC mode, use
[
] to select the card remote controller mode you want to use.
Remote controller operation enabled
•Enabling the card remote
controller for recording causes either “
” or
“ ” to appear on the
2s
monitor screen.
: Pressing the remote controller’s shutter button immediately releases the shutter.
: Pressing the remote controller’s shutter button
2s
releases the shutter about two seconds later (same as the
146