OTHER RECORDING FUNCTIONS
Before Using an External Flash Unit
Be sure to perform the following steps before using an external flash unit.
1.In a REC mode, press [MENU].
2.Select the “REC” tab, select “External flash”, and then press [].
3.Use [] and [] to select “On”, and then press [SET].
To do this: | Select this setting: |
Enables firing of an external flash. On
Disables firing of an external flash. Off
IMPORTANT! 
•Note that the brightness of what you see on the monitor screen will be different from the brightness of the image you record. Make sure you check the settings of your external flash and of the camera before recording.
•Turning the camera’s external flash setting on and off not only determines whether or not a connected external flash fires, it also changes the setup of the camera. Make sure you always turn the external flash setting off whenever you are not using an external flash unit for recording.
150