OTHER SETTINGS
Using the Alarm
You can configure up to three alarms that cause the camera to beep and display a specified image at the time you specify. Specifying a movie or an audio snapshot plays back the image and the audio at the assigned time. Specifying a voice recording file plays the audio.
•You can configure up to three alarms, named “Alarm 1”, “Alarm 2”, and “Alarm 3”.
To set an alarm
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Alarm”, and then press [].
3.Use [] and [] to select the alarm (1, 2, or 3)
whose setting you want to configure, and then press [].
4.Use [] and [] to select the setting you want to change, and then use [] and [] to change the selected setting.
•You can set an alarm time and configure the alarm to sound only once (Once) or at the same time everyday (Daily). You can also turn the alarm on or off.
5.Press [DISP].
•You could press [SET] in place of [DISP] if you want to configure the alarm without an image.
6.Use [] and [] to select the scene you want to appear at the alarm time, and then press [SET].
7.After all the settings are the way you want, press [SET].
191