OTHER SETTINGS
To set the volume level
1.In a REC mode or the PLAY mode, press [MENU].
2.Select the “Set Up” tab, select “Sounds”, and then press [].
3.Use [] and [] to select “Volume”.
4.Use [] and [] to specify the volume setting you want, and then press [SET].
•You can set the volume in the range of 0 (no sound) to 7 (loudest).
NOTE 
•The initial default volume setting is 3.
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup screen image, which causes it to appear on the monitor screen for about two seconds whenever you turn on the camera in a REC mode.
1.In a REC mode or the PLAY mode, press [MENU].
2.Select the “Set Up” tab, select “Startup”, and then press [].
3.Use [] and [] to display the image you want to use as the startup image.
4.Use [] and [] to change the setting, and then press [SET].
To do this: | Select this setting: | |
|
| |
Use the currently displayed image | On | |
as the startup screen image | ||
| ||
|
| |
Disable the startup screen | Off | |
|
|
187