PLAYBACK
To specify the slideshow time
1.Use [] and [] to select “Time”.
2.Use [] and [] to specify the time setting you want, and then press [SET].
•You can specify a time in the range of 1 to 60 minutes.
3.Use [] and [] to select “Start”, and then press [SET].
•This starts the slideshow.
To set the slideshow interval
1.Use [] and [] to select “Interval”.
2.Use [] and [] to specify the interval setting you want, and then press [SET].
•You can specify “MAX”, or a value in the range of 1 to 30 seconds as the interval.
•When the interval setting is in the range of 1 to 30, the audio of movies, audio snapshots, and voice recording files are played back to the end, even if the recording is longer than the specified interval.
•When “MAX” is specified for the interval, the audio of movies, audio snapshots, and voice recording files are not played back.
•When “MAX” is selected for the interval, only the first frame of movie files is played.
3.Use [] and [] to select “Start”, and then press [SET].
•This starts the slideshow.
170