OTHER RECORDING FUNCTIONS

IMPORTANT!

•The “ ” setting is useful when you want to be part

2s

of the image you are recording. The delay gives you time to look at the camera after operating the remote controller.

•The remote controller can be used in the PLAY mode and the Voice Recording mode, regardless of the Triple Self-timer setting.

Using the Card Remote Controller

Point the signal emitter on the remote controller at the camera’s signal receiver (front or side), and perform the operation you want.

Card remote controller button operations are identical to those of the corresponding camera buttons.

•The range of the card remote controller is normally about five meters on a straight line between the signal emitter and front camera signal receiver, and about one meter from an angle to the right of the front of the camera.

Remote control signal receivers

Signal emitter

147