On the camera’s monitor screen, use [] and [] to select “Print”, and then press [SET].
• This starts printing and displays the message “Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even though printing is still being performed. Pressing any of the camera’s buttons while printing is in progress will cause the message to reappear.
• The print menu will appear when printing is complete.
• This automatically starts printing of the images you specified with the DPOF procedure.
PRINTING IMAGES
13.The camera will turn off automatically when printing is complete. After this happens, disconnect the USB cable from the camera.
To print a group of images
1.Use the DPOF procedure on page 207 to specify the images in file memory that you want to print.
2.Perform steps 1 through 10 of the procedure under “To print a single image” on page 210.
3.On the print menu, use [] and [] to select “DPOF”, and then press [SET].
4.
213