PRINTING IMAGES

5.To print again, repeat the above from step 3.

•A message appears on the monitor screen, followed by the DPOF setting screen (page 208), if there are no DPOF settings currently configured on the camera to control the printing operation. If this happens, configure the required DPOF settings and then try printing again.

6.The camera will turn off automatically when printing is complete. After this happens, disconnect the USB cable from the camera.

Printing Precautions

•See the documentation that comes with your printer for information about print quality and paper settings.

•Contact your printer manufacturer for information about models that support PictBridge and USB DIRECT-PRINT, upgrades, etc.

•Never disconnect the USB cable, or perform any camera operation while printing is in progress. Doing so causes a printer error.

214