OTHER SETTINGS
Stopping the Alarm
When an alarm time is reached while the camera is turned off, the alarm will sound for about one minute (or until you stop it), and then the camera will turn on. To stop the alarm after it starts to sound, press any button.
IMPORTANT! 
•Note that the alarm does not sound if the alarm time is reached when any one of the following conditions exists.
—While the camera is turned on
—While a USB data communication operation is in progress
Setting the Clock
Use the procedures in this section to select a Home Time zone, and to change its date and time settings. If you want to change the time and date setting only without changing the Home Time Zone, perform the procedure under “To set the current time and date” (page 193) only.
IMPORTANT! 
•Make sure you select your Home Time zone (the zone where you are currently located) before changing the time and date settings. Otherwise, the time and date setting will change automatically when you select another time zone.
To select your Home Time zone
1.In a REC mode or the PLAY mode, press [MENU].
2.Select the “Set Up” tab, select “World Time”, and then press [].
• This displays the current World Time zone.
3.Use [] and [] to select “Home”, and then press [].
192