APPENDIX
| Symptom |
| Possible Cause |
| Action |
|
|
|
| ||
| Color of the playback | Sunlight or light from another source is shining | Position the camera so sunlight does not shine | ||
| image is different from the | directly into the lens during recording. | directly into the lens. | ||
Playback | image on the monitor |
|
|
|
|
screen during recording. |
|
|
|
| |
|
|
|
|
| |
|
|
|
| ||
| Images are not displayed. | A memory card with | Use a different card. This camera cannot display | ||
|
| with another camera is loaded in the camera. | |||
|
|
|
| using another digital camera. | |
|
|
|
| ||
| All buttons and switches | Circuit problem caused by electrostatic charge, | Remove the battery from the camera, reinsert it, | ||
| are disabled. | impact, etc. while the camera was connected to | and then try again. | ||
|
| another device. |
|
| |
|
|
|
|
|
|
| Monitor screen is off. | 1) | USB communication is in progress. | 1) | After confirming that the computer is not |
|
|
|
|
| accessing camera memory, disconnect the USB |
Other |
|
|
|
| cable. |
| 2) | The monitor screen is turned off (in a REC | 2) | Press [DISP] to turn on the monitor screen. | |
|
| ||||
|
|
| mode). |
|
|
|
| 3) | The camera is connected to a TV for image | 3) | Unplug the AV cable. |
|
|
| output. |
|
|
|
|
|
|
|
|
| Cannot transfer files over a | 1) | USB cable is not connected securely. | 1) | Check all connections. |
| USB connection. | 2) | USB driver is not installed. | 2) | Install the USB driver on your computer (page |
|
|
|
|
| 216). |
|
| 3) | Camera is turned off. | 3) | Turn on the camera. |
|
|
|
|
|
|
258