
To replace the memory back-up battery
Before using the Label Printer for the first time, be sure that you first use the following procedure to install the memory
2. Use a small phillips head screwdriver to loosen the screw that secures the
3. Wipe off the surfaces of a CR2032 battery with a soft dry cloth, and install it with its plus (+) side facing up (so you can see it).
4. Carefully replace the battery compartment cover and secure it in place with the screw.
•You should use the above procedure to replace the memory
To replace the main batteries
1.Switch power off.•If you are using the AC adaptor to power the unit, you should also unplug the adaptor from the Label Printer.
2.Open the battery compartment cover on theback of the Label Printer by sliding it in the direction indicated by the arrow.
3. Remove all eight of the old batteries.4. Load a set of eight new batteries into the battery compartment, making sure that their positive (+) and negative
10