
1. Input the text.
2. Press FORM to display the FORM menu.
FUNCSHIFT LENGTH | A | ||||||||||
CODE PITCH | A | ||||||||||
VERT |
| ||||||||||
MIROR FEED |
| ||||||||||
OVER |
| ||||||||||
CAPS BL |
| SPACE |
| ||||||||
|
| ||||||||||
Yes | SET | No | ESC |
|
|
|
|
|
| ||
3. Use Kand Lto highlight LENGTH, and press SET. |
| ||||||||||
FUNCSHIFT VHS | A | ||||||||||
CODE 8mm | A | ||||||||||
VERT |
| ||||||||||
MIROR CASSETTE |
| ||||||||||
OVER |
| ||||||||||
CAPS FLOPPY |
| ||||||||||
Yes | SET | No | ESC |
|
|
|
|
|
|
4.Use K and L the highlight CASSETTE.
5.Press SET to apply the setting and return to the text input screen.
•If the text you input is too long to fit within the tape length you specified, the error mes- sage TEXT DOES NOT FIT! appears on the display for about one second. When this happens, try making the characters smaller or inserting newline marks (see “To input
To specify your own tape length
Example: To specify a tape length of 10cm for the text “ABXYZ Computer Company”.
1.Input the text.
2.Press FORM to display the FORM menu.
FUNCSHIFT LENGTH
CODEVERT PITCH
MIROR FEED
OVER
CAPS BL SPACEYes SET No ESC
A A
3. Use Kand Lto highlight LENGTH, and press SET.
4.Use K and L to highlight FREE, and press SET.
•Since there are six options on this menu, they do not all fit on a single screen. To view the two op-
tions at the bottom of the menu (FREE and CAN- CEL), press L four times.
FUNCSHIFT VHS | A | ||||||||||
CODE 8mm | A | ||||||||||
VERT |
| ||||||||||
MIROR CASSETTE |
| ||||||||||
OVER |
| ||||||||||
CAPS FLOPPY |
| ||||||||||
Yes | SET | No | ESC |
|
|
|
|
|
| ||
FUNCSHIFT T LENGTH | A | ||||||||||
CODE | A | ||||||||||
VERT |
| ||||||||||
MIROR B |
| LENGTH |
| ||||||||
|
| ||||||||||
OVER |
| ||||||||||
CAPS |
| ||||||||||
Yes SET No ESC |
|
5. Use K and L to select
42