4.Use K and L to select OFF (to switch the beep tone off) or ON (to switch the beep tone on), and then press SET.

Setting the message language

The Label Printer lets you specify English, German, French, Italian, or Spanish as the language to use for display messages.

To set the message language 1. Switch power on.

2. Press SET UP to display the setup menu.

FUNCSHIFT INPUT

CODEVERT DENSITY

MIROR SOUND

OVER

CAPS WIDTH

Yes SET No ESC

A A

3.Press L and K to highlight LANGUAGE, and then press SET.

Note that the language option does not appear im- mediately on the screen when you first display the

set up menu. This is because there are more than four items in the menu. Use L to scroll down four

times to make the LANGUAGE option appear.
FUNCSHIFT ENGLISH ACODEVERT DEUTSCH A MIROR FRANÇAIS

OVER

CAPS ITALIANO

Yes SET No ESC

4.Use K and L to highlight the language you want to use, and then press SET to apply the setting and return to the text input screen.

Since there are five languages, they do not all fit on a single screen. To view the language at the bottom of the menu (ESPAÑOL), press L four times.

Setting the unit of measurement1.Switch power on.2.Press SET UP to display the setup menu.

FUNCSHIFT INPUT

CODEVERT DENSITY

MIROR SOUND

OVER

CAPS WIDTH

Yes SET No ESC

A

A

3.Press Land Kto highlight cm/inch, and then press SET.

Note that the cm/inch option does not appear im- mediately on the screen when you first display the

set up menu. This is because there are more than four items in the menu. Use L to scroll down five times to make the cm/inch option appear.

FUNCSHIFT cm/inch A

CODEA

VERT

MIROR cm

OVER

CAPS inch

Yes SET No ESC

4.Use L and K to highlight the measurement unit you want to use, and then press SET to apply the setting and return to the text input screen.

16