
Note the following important precautions when using an AC adaptor to power your Label Printer.
•Use only a genuine CASIO
•Be sure to switch the Label Printer off before you connect the adaptor. Do not switch power on until the adaptor is connected to the Label Printer and plugged into an AC outlet.
To connect the AC adaptor
Connect the AC adaptor to the Label Printer as illustrated on the right. Plug the other end into a standard household AC outlet.
Switching Power On and OffPress ON to switch power on, and OFF to switch power off.Important!
If you are using the Label Printer for the first time, you should use the procedure described under “Resetting the Memory” to switch power on.
Resetting the MemoryYou should reset the memory of the Label Printer before using it for the first time, after you have not used it for a long time, or if nothing happens when you switch power on even after you change the batteries.
Important!
Resetting Label Printer memory clears the memory of all input data.To reset the memory
1.Make sure that Label Printer power is off.2.While holding down the PRINT and ESC keys, press ON to switch power on.FUNC
SHIFTA CODEVERT INITIAL? A
MIROR
OVER
CAPS
Yes SET No ESC
11