3.Use L to highlight DIRECTON, and press SET.

Since there are eight options on this menu, they do not all fit on a single screen. To view the four options at the bottom of the menu, press L four times.

4.Use L to highlight VERT (vertical).5.Press SET to return to the text input screen.Mirror Image

When you specify mirror image for text, it is printed in reverse image. Use mirror image when you plan to print on transparent tape, with the printing on the inside. When viewed through the transparent tape, the text will appear normal. You can also use mirror image printing when using iron-on transfer tape to print iron-on transfers.

Normal

Mirror Image

To specify mirror image

1.

Input the text you want to print.

 

 

2.

Press FORM to display the FORM menu.

FUNCSHIFT LENGTH

 

 

 

A

 

 

CODE PITCH

A

 

 

VERT

 

 

 

MIROR FEED

 

OVER

CAPS BL SPACE

Yes SET No ESC

3.Use L to highlight MIRROR, and press SET.Since there are eight options on this menu, they

do not all fit on a single screen. To view the four options at the bottom of the menu, press L four times.

FUNCSHIFT MIRROR

CODE

VERT

MIROR NORMAL

OVER

CAPS MIRROR

Yes SET No ESC

A

A

A

SANS-SERIF

MANUAL FEED 6mm

4.Use K and L to highlight selection you want.Highlight MIRROR to switch mirror image on, and NORMAL to switch it off.

5.Press SET to return to the text input screen.

Text Alignment

After you specify the length of the tape to be printed, you can position the text on a label to be left flush, right flush or centered.You should remember that the results that you get from a text alignment specification will depend on whether your label is made up of one block or multiple blocks. The following shows examples of each option available.

45