
2.Press PRESETS.
FUNCSHIFT LAYOUT | A | ||||||||
CODE PHRASES | A | ||||||||
VERT |
| ||||||||
MIROR NUMBER |
| ||||||||
OVER |
| ||||||||
CAPS |
| ||||||||
Yes |
| No |
|
|
|
|
|
|
|
SET | ESC |
|
|
|
|
|
|
3. Use Kand Lto move the highlighting to NUMBER, | FUNCSHIFT FROM? |
and then press SET. | |
| CODE |
| VERT |
| OVER R 111 |
| MIROR |
| Yes SET No ESC |
A
A
A
MANUAL FEED 6mm
4.Use H and J to move the cursor to the start point, and then press SET.
•After you highlight the number, you can increase it by pressing K or decrease it by pressing L.
•You can only highlight numbers. You cannot high- light alpha characters.
5.Use H and J to move the cursor to the end point, and then press SET.
6.Press PRINT to start the print operation.
FUNCSHIFT NUMBER
CODEVERT PRINT?
MIROR ER 111 OVER
CAPS
Yes SET No ESC
A
A
A
MANUAL FEED 6mm
7.Cut the tape and then press PRINT to print the next label.
• The number is automatically increased with each printing operation you perform.
8.Repeat step 6 as many times as necessary.
•You can abort the number printing operation at any time by pressing ESC.
57