Casio KL-7000 CODEVERT RECALL, To recall data from memory, NEW, CALL, STORE, WHERE, DELETE, CODE 13 4cm, MIROR COMBINE, Deleting Text, Use, Use, 1. Press MEMORY

To recall data from memory

1. Press MEMORY.

FUNCSHIFT STORE					A
CODEVERT RECALL					A
MIROR DELETE
OVER
CAPS
Yes		No
	SET		ESC
2. Use Kand Lto highlight RECALL, and press SET.				1	AA
FUNCSHIFT CALL
CODE 13 4cm					A
VERT					SANS-SERIF
OVER ABXYZ					MANUAL6mm FEED
MIROR

Yes SET No ESC

3.Use K and L to scroll through the text stored in memory. Use H and J to scroll the text left and right.

4.After you find the text that you want to recall, press SET.

•The NEW/COMBINE display appears only if you already have input text before starting the recall operation. If you did not input any data before start- ing the recall operation, this display does not ap- pear, and steps 5 and 6 of this procedure are not necessary (so you should skip directly to step 7).

FUNCSHIFT NEW	A
CODE	A
VERT
MIROR COMBINE
OVER
CAPS
Yes SET No ESC

5.Move the highlighting to specify whether you want to use the recalled text as new data (NEW) or in combination with existing data (COMBINE).

•If you select NEW, the recalled data replaces any text that was on the data input screen when you pressed SET.

•If you select COMBINE, the recalled data is inserted into the text on the input display.

6.Press SET to recall the text from memory.

•If you selected NEW in step 5, the procedure ends here. If you selected COMBINE, continue with the following.

FUNC		A
SHIFT WHERE?		A
CODE		A
VERT	Eric	SANS-SERIF
MIROR
OVER		MANUAL6mm FEED

Yes SET No ESC

7.Use H and J to move the cursor to the location where you want the recalled text to be inserted.

8.Press SET to recall the text and insert it at the cursor position.

Deleting Text

Use the following procedure to delete text from memory.

63