1. Input the text and define the two blocks.

2. Use H and J to move the cursor so it is inside the block whose character pitch you want to change.

3. Press FORM to display the FORM menu.

 

FUNCSHIFT LENGTH

A

CODEVERT PITCH

A

MIROR FEED

 

OVER

 

CAPS BL

 

SPACE

 

 

 

Yes

SET

No

ESC

 

 

 

 

 

 

4.Use L to highlight PITCH, and press SET.5.Use K and L to select the character pitch you want.You can select NONE, NARROW, or WIDE.In this example, you should select WIDE.

6.After selecting the character pitch, press SET to ap- ply the setting and return to the text input screen.

FUNC SHIFT CODE VERT MIROR OVER

22

14 4cm

ABXYZBL

It is impossible to change the PITCH setting while the cursor is located at a block mark () at the beginning of a block of text.

Block Length

You can individually specify the length of each block that makes up your label. If you are making title labels for the edge of binders, for example, you can specify a uniform length for the title, date, and author. This causes the text on the labels to be uniformly aligned when the binders are placed on a bookshelf.

The block length setting you make is applied only to the block where the cursor is located when you perform the setting operation.

To specify a block length

Example: To specify the following block lengths for the text noted below.

Text

Block Length

 

 

Monthly Sales

6.5 cm

 

 

Accounting Department

6.5 cm

 

 

1st Quarter 1995

6.5 cm

 

 

1.Input the text and define the three blocks.

2.Use H and J to move the cursor so it is inside the block whose length you want to change.

39