Manuals / Brands / Computer Equipment / Label Maker / Casio / Computer Equipment / Label Maker

Casio KL-7000 To specify the tape width, (a), bon, 1. Switch power on, between the head and roller, turning in the direction noted by the arrow

1 81

Download 81 pages, 805.57 Kb

	• Be sure to turn the ink ribbon take up spool
	only in the direction indicated by the arrow	(a)
	(a).	(a)
	(a).
	• Turn the spool until the other spool (b) starts
	turning in the direction noted by the arrow.
	This indicates there is no slack in the rib-
	bon.	(b)
		(b)
	5. Load the tape cartridge into the Label Printer,
	making sure that the tape and ink ribbon pass	Head
	between the head and roller.	Roller

6. Close the tape cartridge compartment cover.

7. Switch on Label Printer power and press FUNC and then FEED two or three times to make sure that the tape comes out without any problem.

• If the tape does not come out normally, switch off power and start again from step 1 above.

To specify the tape width

Important!

•When using 6mm tape, certain character sizes and layouts can cause characters to run off the top or bottom of the tape.

•Be sure to specify 6mm tape whenever you are using it.

•In addition to the following tape size specification procedure, you can also specify 6mm tape by holding down the 6 key while pressing ON to switch power on. To specify another tape size (other than 6mm) you must use the following procedure.

1. Switch power on.

14

Contents

Page Introduction Important Contents Part Getting Ready Part 3 Inputting Characters, Symbols and Illustrations Part 6 FORM Menu Functions Quick Formats Presets Printing Memory Getting Acquainted •Do not pull on the tape or try to force it back into the Label Printer General Guide Front Back/Left Side Bottom Label Printer Menus INPUT CODEVERT DENSITY SOUND WIDTH Getting Ready To replace the memory back-upbattery To replace the main batteries To connect the AC adaptor To reset the memory To load a tape cartridge Page To specify the tape width To cancel sound effects when switching power on To switch sound effects on and off To set the message language To produce a demo print using tape other than 6mm To produce a demo print using 6mm tape Inputting Characters, Symbols, and Illustrations •Code indicator •Vertical printing indicator •Mirror image printing indicator •Overwrite mode indicator •Caps mode indicator To input alpha-numericcharacters To input special symbols To input illustrations Deleting and Inserting Characters To move the cursor To delete characters using the BS key To delete characters using the DEL key To delete a series of characters To clear all text from the display To clear specific text Overwrite Insert To switch between overwrite and insert Character Attributes and Text Effects To specify attributes before inputting characters To change attributes in the middle of text To change attributes or effects of existing text How to tell the current font settings To change the font setting How to tell the current style settings To change the style setting About Auto Fit About the FIT mark How to tell the current size settings To change the characters size To assign text effects U LINE BOX To remove text effects Page FORM Menu Functions To create a block To delete a block mark To specify the character pitch To specify a block length FUNCSHIFT T LENGTH To cancel block length settings To select a preset tape length Page Page To select a feed option To specify the block spacing To specify vertical printing To specify mirror image To specify text alignment To switch justification on and off Quick Formats TOO MANY To select a quick format To cancel a quick format Presets VIDEO AUDIO MIROR NAME/FIL CAPS MEM DATA VHS C PRINT To store a preset layout label in memory To recall a preset layout label from memory LAYOUT NUMBER VIDEO AUDIO RECALL Page To print a preset phrases LAYOUT To print a numbered series FROM Printing To print a tape To show the image display To show the layout display To add a frame around the outside of the printing area Page Memory To store data into memory STORE CODEVERT RECALL USED CODEVERT RECALL To delete text from memory FUNCSHIFT DELETE Reference To clean the printer head and roller Resetting About the Label Printer’s Keys Page Troubleshooting Page Messages Initial Settings Symbols, Illustrations and Frames Page Page Page Page Application Examples SIZE K L (select “1 ⋅ 2”) SET SET SET 5.ILLUST H J (Select ) SET 8.ILLUST H J (Select ) SET 9.PRINT Specifications Model: KL-7000 Input Keyboard Layout: Typewriter (QWERTY) Character Types CASIO COMPUTER CO., LTD