Manual Feed

A B X Y Z

Label Length

The label length is the print area, plus the side spaces.

Settings you make for side spaces, block spacing, and mirror printing affect the entire label length.

Creating and Deleting Blocks

The following procedures describe how to create and delete blocks. Later you will learn how you can change certain settings on a block-by-block basis.

To create a block

Example: To input the text “ABXYZ Computer Company” and create two blocks: “ABXYZ” and “Computer Company”.

1.Input the text.

2.Move the cursor to the space between “ABXYZ” and “Computer Company”.

3.Press BLOCK.

If you wanted to break the text up into three blocks, you would input another block mark.

FUNCSHIFT

22

 

 

CODEVERT

13 6cm

OVER LB

 

Comp

MIROR

 

 

 

 

 

To delete a block mark

To delete a block mark, use the procedures for BS and DEL as described under “Deleting Individual Characters”.

Character Pitch

The term character pitch refers to the relative spacing between characters. The Label Printer provides three character pitches from which to choose: NONE (0mm), NARROW (0.5mm), and WIDE (1mm).

The character pitch setting you make is applied only to the block where the cursor is located when you perform the setting operation.

The default character pitch setting is NONE.

To specify the character pitch

Example: For the two-block text “ABXYZ”, “Computer Company”, to change the spacing of “ABXYZ” to WIDE.

38