Casio LPCW-50 manual To disconnect from a power source and a PC

Important!

•Do not operate the printer while it is standing up on its side. Also, you should not store the printer standing on its side when you are not using it.

•Note that you cannot load or remove a disc unless both the AC adaptor and USB cable are connected to the printer.

Connecting for the First Time

•A USB driver installation Wizard starts up automatically the first time you connect the printer to your computer after installing the CD/DVD LABEL PRINTER application. Follow the instructions that appear on the display to install the USB driver.

•If you are running Windows XP, the message shown below will appear during USB driver installation. When it does, click Continue Anyway to proceed with the installation.

•If you are running Windows 2000, the warning message “Digital Signature Not Found” may appear during USB driver installation. When it does, click Yes to proceed with the installation.

•The above messages do not appear on a system running Windows 98, 98SE, or ME.

To disconnect from a power source and a PC

1.Unplug the USB cable from the PC and printer.

2.Unplug the power cord from the wall outlet, and then unplug the AC adaptor from the printer.

1

2

1

2

Important!

Never disconnect the AC adaptor, power cord, or USB cable while a print operation is in progress. Doing so creates the risk of malfunc- tion.

22