Casio LPCW-50 manual Your CD drive does not, support reading of CD, Text

Symptom		Possible Cause	Recommended Action
● Printing is not	Any of the following		See the separate
clear.	can interfere with		“Quick Start Guide”
● Printing is	proper printing.		sheet for information
poor quality.	•	A disc label that is	about recommended
● Printing is too	•	not smooth.	media.
light.		A disc label that
		has a design or
	•	lines printed on it.
		A disc label that
		support ink jet
		printing only.
	Dirty print head		Clean the print head.
			(page 79).
	Improper print density		Adjust the print
			density. (page 76).
● Printing is	Improper alignment of		Use the alignment
misaligned.	the disc in the tray		guide when aligning
			the disc in the tray
			(page 72).
● Cannot print.	The ink ribbon is used		Replace the ink ribbon
	up.		cassette with a new
			one (page 23).
	The driver is not		Disconnect the USB
	installed correctly.		cable and re-install
			the software.
			Installing the software
			also installs the
			driver. After re-
			installing, connect the
			USB cable again.

Symptom	Possible Cause	Recommended Action
● The last part	Too many characters	Use a smaller font
of input data	per line	size or reduce the
does not		number of characters
print.		per line.
	Too many lines	Use a smaller font
		size or reduce the
		number of lines.
● Cannot import	The music CD you are	Type text manually
CD-Text.	trying to import from	into the label input
	does not have any	boxes, or find a
	CD-Text on it.	Website on the
		Internet that contains
	Your CD drive does not
		the data you want to
	support reading of CD-
		include on the label,
	Text.
		copy it, and then
		paste it into the label
		input boxes.
● Cannot create	The specified drive or	Remove the write
a data index	media where you are	protection or delete
file.	trying to save the	data you no longer
	data is write	need to make room
	protected or full.	from the data index
		file. Other options
		include switching to a
		different drive or
		different media.

81