Projection Operations

zThe [COLOR MODE] key is disabled while the projector is connected to a computer over

a USB connection (page 67). To select the color mode in this case, use “Image Adjustment J Color Mode” (page 32).

Adjusting the Volume Level (VOL +/–)

You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker.

To adjust the volume level

1. On the remote controller, press the [VOL +] or [VOL –] key.

zThis causes the [Volume] screen to appear on the projected image.

2.Press the [VOL +] key or the [X] key to increase the volume, or the [VOL –] or [W] key to lower the volume.

3.After the setting is the way you want, press the [ESC] key.

zThis causes the [Volume] screen to disappear.

Muting the Image and Audio (MUTE)

The mute function causes the projected image to go to black screen, and stop output of the audio from the speaker.

To mute the image and audio

1. On the remote controller, press the [MUTE] key.

zThis causes the projected image to go to a black screen, and stops output from the speaker.

2.To restore the image and audio, press the [MUTE] key again or press the [ESC] key.

zYou can select a black screen, blue screen, or a logo screen for the mute function. For details, see “Screen Settings J Mute Screen” on page 41.

13