
Using the Setup Menu
■Input Settings J Signal Name Indicator
This
Input Source Specific Menu Items
Input Source | Available Items (Parentheses indicate defaults.) |
|
|
RGB | (On), Off |
|
|
Component |
|
|
|
| |
|
|
VIDEO |
|
|
|
No Signal |
|
|
|
Setting Explanations
On: Turns on display of the name of the currently selected input source in the projected image.
Off: Turns off display of the input source name.
Setting Storage
A single setting is stored, which is applied to all input sources.
■Input Settings J Special Signal
When a computer is connected to the RGB input terminal, the projector automatically detects the type of RGB signal being sent from the computer and projects the image. Some signals, however, cannot be detected properly by the projector. When auto detection is not possible for some reason, try using this setting for a computer signal with a resolution of SXGA (1280 ⋅ 1024) or SXGA+ (1400 ⋅ 1050).
Input Source Specific Menu Items
Input Source | Available Items (Parentheses indicate defaults.) |
|
|
RGB | 1280 ⋅ 1024, (1400 ⋅ 1050) |
|
|
Component | None |
|
|
| |
|
|
VIDEO |
|
|
|
No Signal | * Only when the currently selected input source is RGB. |
Setting Explanations
1280 ⋅ 1024: Specifies an SXGA (1280 ⋅ 1024) resolution RGB signal.
1400 ⋅ 1050: Specifies an SXGA+ (1400 ⋅ 1050) resolution RGB signal.
Setting Storage
This setting is saved for the RGB input terminal only.
44