
Using the Setup Menu
To initialize the custom logo
zInitializing custom logo settings clears the currently registered custom logo and returns all of the settings of the custom logo setting screen to their initial defaults.
1.Perform steps 2 and 3 under “To capture a custom logo” on page 53 to display the custom logo setting screen.
2.Use the [S] and [T] keys to select “Initialize Custom Logo Settings”,
and then press the [ENTER] key.
zThis displays a confirmation message asking if you want to initialize custom logo settings.
3.Use the [S] and [T] keys to select [Yes].
4.Press the [ENTER] key to initialize the custom logo settings, or the [ESC] key to exit the initialize operation without doing anything.
zPressing the [ENTER] key initializes settings and returns to the custom logo settings screen.
zPressing the [ESC] key returns to the custom logo settings screen without initializing anything.
5.Press the [MENU] key to exit the setup menu.
zInitializing the custom logo settings and deleting the custom logo causes the projector’s preset logo to appear when “Logo” is selected for the startup screen (page 40), no signal screen (page 40), and mute screen (page 41).
57