
Using the Setup Menu
Input Source Specific Menu Items
Input Source | Available Items (Parentheses indicate defaults.) |
|
|
RGB | On, (Off) |
|
|
Component |
|
|
|
| |
|
|
VIDEO |
|
|
|
No Signal |
|
|
|
Setting Explanation
On: Turns on the power on password, which requires input of a password to turn on the projector.
Off: Turns off the password, which allows the projector to be operated without inputting a password.
Setting Storage
A single setting is stored, which is applied to all input sources.
Using the Password Input Dialog Box
The password input dialog box will appear when any one of the following occurs.
zWhen you turn on the projector while the password is turned on
zWhen you turn the password on or off
zWhen you change the password
When this dialog box is shown, perform a remote controller key operation for each of the password input positions. The following explains how to input numbers.
zThe cursor is used to select an input position for input.
zYou can perform any one of the 20 remote controller key operations shown below when inputting a password.
[AF/AK], [PAGE UP], [PAGE DOWN], [MENU], [KEYSTONE],
[RGB], [VIDEO],
zEach time you perform a remote controller key operation, “” appears at the current input position, and the cursor moves to the next input position to the right.
zA password can be from one to eight key operations long.
zAfter performing all of the key operations you want, press the [ENTER] key.
zTo clear your input, press the [ESC] key.
49