Appendix

zContinued use of the projector after dust has accumulated around the intake vents can cause overheating of internal components and lead to malfunction.

zCertain operating conditions also can cause dirt and dust to accumulate around the projector’s other intake and exhaust vents (on the sides, etc.). If this happens, use the same procedure as that described above to clean the side vents.

Reattaching the Lens Cover

Use the following procedure to replace the lens cover if it should accidentally become detached from the projector.

1. Insert the nub (3) of the left tab of the lens cover into the depression (1) of the tab under the lens.

zWhen performing the above step, make sure that the lens cover is angled less than 90 degrees.

1

32 4

71