Using the Setup Menu

Setting Screen Type Sub-menu Item

This type of sub-menu item displays a separate screen that you use to configure its settings. Examples: Image Adjustment J Color Mode; Option Settings1 J Language, etc. Operation: The following example shows how to configure settings for Input Settings J

Video Signal, S-Video Signal

1. Press the [VIDEO] key to select the VIDEO input terminal as the input source.

2. Perform steps 2 through 4 under “Basic Setup Menu Operations” on page 24. On the “Input Settings” main menu, select the “Video Signal” sub-menu item.

3. Press the [ENTER] key.

zThis displays the video signal selection screen shown below.

4. Use the [S] and [T] keys to highlight the item you want to select, and then press the [ENTER] key.

5. After you are finished configuring the settings, press the [ESC] key to close the setting screen and return to the sub-menu screen.

zAfter you are finished, press the [MENU] key to exit the setup menu.

zNote that the available settings and configuration procedures depend on the setting screen. See “Setup Menu Reference” on page 31 for details about each sub-menu item.

27