Using the Setup Menu

3. Use the [W] and [X] keys to turn the power on password on or off.

zChanging the power on password setting causes the message like the one shown below to appear.

zPress the [ENTER] key to change the setting. If you do not want to change the setting, press the [ESC] key.

To change the power on password

1. Display the power on password setting screen.

zSee “To display the power on password setting screen” on page 50.

2.Use the [S] and [T] keys to select “Change Password”.

3.Press the [ENTER] key.

zThis displays the new password input dialog.

4.Input the new password, and then press the [ENTER] key.

zThis displays a dialog box for re-inputting the password for confirmation.

5.Re-input the same password you input in step 4, and then press the [ENTER] key.

zIf the two passwords you input were identical, the message “Your new password has been registered.” appears. Press the [ESC] key.

zIf the password you input here is different from the one you input in step 4 the message “The two passwords you input are different.” appears. Press the [ESC] key to return to step 1.

51