Using the Setup Menu
zBesides the menu operation explained above, the following operations can also be used to turn off key lock.
z While the projector is on: Hold down the projector’s [ESC] key for about five seconds.
zWhile the projector is off: Simultaneously hold down the projector’s [ESC] and [
] (power) keys for about five seconds. This turns on the
projector and also turns off key lock.
zYou can use the above projector operations to turn off key lock if the remote controller batteries unexpectedly go dead, etc.
■Option Settings1 J Power On Password
This
While the password is turned on, projector operation is impossible unless the correct password is entered. For more information about the power on password, see “Password Feature” on page 69.
Initial Factory Default Password
The following is the
[AF/AK], [PAGE UP], [PAGE DOWN], [S], [T], [W], [X], [MENU]
zNote that the projector’s password is not really a “word”, but rather a series of remote controller key operations.
zIf you need to keep projector operation secure, be sure to change the initial factory default password to a different one as soon as possible.
zThe password can be input using the remote controller only. Optimum security is ensured by turning on the password and keeping the remote controller with you.
zFor information about what you should do if you forget your password, see ”If you forget your password...” on page 69.
48