Projection Operations

Manually Selecting the Input Source

The procedure you should use to select the input source depends on whether you are using projector keys or remote controller keys.

[Projector]

[Remote Controller]

[RGB] key

[VIDEO] key

[S-VIDEO] key

ZOOM FOCUS D-ZOOM

RGB VIDEO S-VIDEO

AUTO P-IN-P

VOLUME

MUTE FREEZE

[INPUT] key

zTo select the input source using projector keys, press the [INPUT] key on the projector to cycle through input sources in the sequence shown below.

(RGB/Component)

 

 

 

(VIDEO)

 

 

 

(S-VIDEO)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

zTo select the input source using remote controller keys, press the [RGB/COMPONENT], [VIDEO], or [S-VIDEO] key on the remote controller to select the input source you want.

The currently selected input source name is shown in the upper right corner of the projection screen.

zIf the currently selected input source is not sending an input signal, the message “No signal input” appears in place of the input source name.

zWhether the displayed input source name shows [RGB] or [Component] depends on the current “Input Settings J RGB Input” (page 42) setting that is configured on the projector’s setup menu.

6