Casio PX-5S ■Editable Drum Tone Parameters

Using Built-in Tones (Tutorial)

Display Text		Description	Settings
	Pitch Rise	Rise. Specifies the time it takes from the start of application of the LFO
	Filter Rise		–64 - 0 - +63
	Amp Rise	until the effect reaches the level specified by Depth, above.
	Pitch Mod.Depth
	Filter Mod.Depth	Modulation depth. Specifies how modulation is applied to the LFO.	–64 - 0 - +63
	Amp Mod.Depth
Pan >Ent		Pan. This is a group of editable parameters associated with the panning
		(sound stereo position).
		Dynamic panning. To reflect changes in panning in the sound being
	Dynamic Panning	produced, select “On” for this setting. Select “Off” if you do not want	Off, On
		changes reflected.
	Pan Position	Panning position. Select “PreDSP” to apply panning before the DSP, or	PreDSP, PostDSP
		“PostDSP” to apply panning after the DSP.

■Editable Drum Tone Parameters

Display Text			Description	Settings
			Instrument edit. This is a group of editable instruments assigned to
			each keyboard.
Inst Edit >Ent			• Press a keyboard key to specify the key to be edited.	C- - G9
			• For details about “DSP Edit”, see “Applying Effects to Notes” (page
			E-18).
	Inst Select		Instrument number select. Specifies the number of the drum tone	See “Instrument List” at
			assigned to each key.	the back of this manual.
	Note Off Mode		Note off mode. Turning on this setting causes note off to be performed	Off, On
			when a key is released.
			Assign group. Specifies as a value from 1 to 15 which group the
	Assign Group		currently selected key should be placed into. Only one keyboard in a	Off, 1 - 15
			group is sounded at the same time (non-polyphonic).
			Pitch envelope. For details, see the melody tone “Pitch Envelope” on
			page E-11.
	Pitch >Ent		• For details about the setting items below, see the melody tone “Pitch
			Envelope” on page E-11.
			Initial Level, Attack Time
		Coarse	Coarse tune. Changes the pitch of notes by semitone units.	–24 - 0 - +24
		Tune
		Fine Tune	Fine tune. Fine tunes the pitch of the sound. Lowers the value up to	–256 - 0 - +255
			–256 or raises the value up to +255 in semitone steps.
			Filter. For details, see the melody tone “Filter” on page E-11.
			• For details about the setting items below, see the melody tone
			“Filter” on page E-11.
	Filter >Ent		Cutoff, Resonance, Envelope Depth, Attack Level, Decay Time,
			Decay Level
			• For details about the setting items below, see the melody tone “Pitch
			Envelope” on page E-11.
			Initial Level, Attack Time
			Amp. For details, see the melody tone “Amp” on page E-12.
			• For details about the setting items below, see the melody tone
			“Amp” on page E-12.
			Volume
	Amp >Ent		• For details about the setting items below, see the melody tone “Pitch
			Envelope” on page E-11.
			Initial Level, Attack Time
			• For details about the setting items below, see the melody tone
			“Filter” on page E-11.
			Attack Level, Decay Time, Decay Level

E-13