Casio PX-5S Using the Stage Setups (Tutorial), To edit a stage setup, (ZONE), Settings, (NUM KEY), Description, Display Text

Using the Stage Setups (Tutorial)

1 2 3 bo bp bq br bs bt ck cl en

4 5 6 7 8 9 ct dk em

To edit a stage setup

1.

2.

Select the bank and stage setup number you want.

Edit the stage setups as desired.

•The following describes each of the editable parameters.

Editable Parameters

	Display Text					Description	Settings
			Zone parameter edit. This group includes parameters for Zone 1 through 4.
Zone Edit >Ent			• Use the dk (ZONE) minus (–)and plus (+) buttons to select the zone you
				want to edit.
	Mixer Edit >Ent		Mixer edit. This group includes parameters for the mixer within zones.
		Zone Enable	Zone on/off. Turns all zones on or off. This setting is different from the				Off, On
			mixer function part on/off (Part Enable) (page E-37) setting.
							PNO (Piano):
							P00 to U39
			Tone. Selects the tone for each zone. This setting is the same as the mixer				EPN (Electric Piano):
							P000 to U109
			function part tone (page E-37). Use buttons bo through cl to switch between
			tone categories.				ORG (Organ):
							P00 to U49
			• While this item is selected, you can select a tone using the same operation
							STR (Strings, Brass):
		Tone		as that used in the Tone Mode.			P00 to U89
			• The DRM (drums) category cannot be selected for Zone 2. DRM (drums)				GTR (Guitar, Bass):
				and HEX (hex layer) cannot be selected for to Zone 3 or Zone 4. Pressing			P00 to U59
				the button of a category that cannot be selected causes the message			VAR (Synthesizer,
							Various): P000 to U129
				“Invalid Tone” to be displayed. If this happens, wait until the message
							DRM (Drums):
				disappears or press another category button to clear it.
							P00 to U39
							HEX (Hex Layer):
							P000 to U199
			Key Range Low. Specifies the low key range of the keyboard for each zone.
			This setting is used in combination with the Key Range High setting to
			configure key ranges for each zone.
			For example, configuring F3 (low) to C7 (high) for Zones 1 and 2, and C2
			(low) to E3 (high) for Zones 3 and 4 will enable play of Zone 1 and 2 tones on
			the right side keyboard range, and the Zone 3 and 4 tones on the left side
			keyboard in the illustration below.
		Key Range Low			Zone 3	Zone 1	C- - G9
					Zone 4	Zone 2

C2 E3 F3 C7

•After pressing the en (NUM KEY) button to enter the number input mode, you can use the keyboard keys to enter values.

E-31