Casio PX-5S Editable Parameters for All Layers (Layer 1 through Layer 6)

	Using Built-in Tones (Tutorial)
Display Text	Description	Settings
	Key Range High. Specifies the upper limit of the enabled keyboard
	range. Nothing sounds when any keyboard key above this range is
Key Range High	pressed.	C- - G9
	• After pressing the en (NUM KEY) button to enter the number input
	mode, you can use the keyboard keys to enter values.
	Velocity range low. Specifies the minimum value of the effective
VelocityRangeLow	velocity. No sound is produced when playing at a velocity less than	0 - 127
	this setting.
	Velocity range high. Specifies the maximum value of the effective
VelocityRangeHigh	velocity. No sound is produced when playing at a velocity greater than	0 - 127
	this setting.
Start Trigger	Start trigger. Specifies whether a note is sounded when a keyboard key	KeyOn, KeyOff
	is pressed (KeyOn) or when a keyboard key is released (KeyOff).

Editable Parameters for All Layers (Layer 1 through Layer 6)

Editable Parameters

•Shaded cells indicate a group made up of multiple parameters. Press the em (ENTER) button to display the setting items that make up a group.

Display Text		Description			Settings
	Parameter initialization by wave selection. Select “On” to link the
Init By Wave	envelope and other parameters when the wave changes or “Off” not to				Off, On
	link.
Volume	Volume. Overall hex layer volume.				0 - 127
	Common Effect. This is a group of editable effect function parameters.
	For details, see the melody tone “Effect” on page E-12.
Common Effect >Ent	• For details about the setting items below, see the melody tone
	“Effect” on page E-12.
	Chorus Send, Delay Send, Reverb Send
	LFO. This is a group of editable LFO parameters applied to the pitch of
	a layered tone. For details, see the melody tone “LFO” on page E-12.
	• For details about the setting items below, see the melody tone “LFO”
	on page E-12. You can input a value in the range from 0 to 127.
	Pitch Rate, Pitch Delay, Pitch Rise, Pitch Mod.Depth*, Filter Amp
	Rate, Filter Delay, Filter Rise, Filter Mod.Depth*, Amp Delay, Amp
LFO >Ent	Rise, Amp Mod.Depth*
	* Performs same operation as the melody tone setting range (–64 to 0
	to +63).
	• For details about the setting items below, see the melody tone “LFO”
	on page E-12. Note, however, that the setting ranges of Pitch Depth,
	Filter Depth, and Amp Depth are –128 to 0 to +127.
	Pitch Wave, Filter Amp Wave, Pitch Depth, Filter Depth, Amp Depth
	Detune. Causes the tuning of Layers 1 through 6 to be slightly different
	from each other. A larger setting value increases the amount of
	detuning. The maximum value (31) results in a difference of 100 cents
	(semitones) between Layer 1 and Layer 6.
	Detune = 31
		+50cent
Detune					0 - 31
			Layer4 Layer5	Layer6
	Detune = 0
		Layer1 Layer2 Layer3
				−50cent

E-17