Using Built-in Tones (Tutorial)

16:Pitch Shifter

This effect transforms the pitch of the input signal.

Parameter Value Ranges:

1 :Pitch (–24 to 0 to +24)

Adjusts the pitch shift amount in quarter tone steps.

2 :High Damp (0 to 127)

Adjusts the high-range damp. A larger number increases damping.

3 :Feedback (0 to 127)

Adjusts the feedback amount.

4:Input Level (0 to 127) Adjusts the input level.

5:Wet Level (0 to 127)

Adjusts the level of the effect sound.

6 :Dry Level (0 to 127)

Adjusts the level of the direct sound.

17:Multi Chorus

This is a chorus effect with six different LFO phases.

Parameter Value Ranges:

1:LFO Rate (0 to 127) Adjusts the LFO rate.

2:Depth (0 to 127) Adjusts the LFO depth.

3:Wet Level (0 to 127)

Adjusts the level of the effect sound.

4 :Dry Level (0 to 127)

Adjusts the level of the direct sound.

18:Ring Modulator

Multiplies the input signal with an internal oscillator signal to create a metallic sound.

Parameter Value Ranges:

1 :OSC frequency (0 to 127)

Sets the reference frequency of the internal oscillator.

2:LFO Rate (0 to 127) Adjusts the LFO rate.

3:Depth (0 to 127) Adjusts the LFO depth.

4:Tone (0 to 127)

Adjusts the timbre of the ring modulator input sound.

5 :Wet Level (0 to 127)

Adjusts the level of the effect sound.

6 :Dry Level (0 to 127)

Adjusts the level of the direct sound.

19:Delay

Delays the input signal and feeds it back to create a repeating effect.

Parameter Value Ranges:

1:Delay Time (0 to 127) Adjusts the total delay time.

2:Delay Ratio L (0 to 127)

Adjusts the ratio of the left channel relative to the total delay time.

3 :Delay Ratio R (0 to 127)

Adjusts the ratio of the right channel relative to the total delay time.

4 :Delay Level L (0 to 127)

Adjusts the level of the left channel.

5 :Delay Level R (0 to 127)

Adjusts the level of the right channel.

6:Feedback Type (Stereo, Cross) Selects the feedback type. Stereo: Stereo feedback Cross: Cross feedback

7:Feedback (0 to 127)

Adjusts the feedback amount.

8 :High Damp (0 to 127)

Adjusts the high-range damp. A larger number increases damping.

9:Delay Tempo Sync (Off, 1/4, 1/3, 3/8, 1/2, 2/3, 3/4, 1) Specifies how the actual total delay time is synced with tempo.

•Off: Uses Delay Time value.

•1/4 to 1: Uses value in accordance with number of beats.

10:Input Level (0 to 127) Adjusts the input level.

11:Dry Level (0 to 127)

Adjusts the level of the direct sound.

12:Wet Level (0 to 127)

Adjusts the level of the effect sound.

20:Piano Effect

This effect is suited to acoustic piano play.

Parameter Value Ranges:

1 :Lid Type (Closed, Semi Opened, Full Opened)

Adjusts how sound resonates in accordance with the opening state of a piano lid.

2 :Reflection Level (0 to 127)

Adjusts the level of the initial reflection.

3:Input Level (0 to 127) Adjusts the input level.

4:Wet Level (0 to 127)

Adjusts the level of the effect sound.

5 :Dry Level (0 to 127)

Adjusts the level of the direct sound.

E-22