Casio PX-5S Editable Parameters

		Using Built-in Tones (Tutorial)
Editable Parameters
Display Text		Description	Settings
Layer On/Off		Layer on/off. Selecting off disables layer.	Off, On
		Wave number. Selects a waveform type.	See “Wave List” at the
Wave Number		• Refer to the “Wave List” at the back of this manual for information
			back of this manual.
		about wave types.
		Pitch envelope. For details, see the melody tone “Pitch Envelope” on
		page E-11.
		• For details about the setting items below, see the melody tone “Pitch
		Envelope” on page E-11. You can input “Initial Level” and “Release
		Level” values in the range of –256 to 0 to +255. You can input “Attack
		Time” and “Release Time” values in the range of 0 to 127.
Pitch >Ent		Octave Shift, Initial Level, Attack Time, Release Time, Release Level
		• For details about the setting items below, see drum tone “Pitch
		Envelope” on page E-13.
		Coarse Tune, Fine Tune
		• For details about the setting items below, see the melody tone
		“Filter” on page E-11. You can input “Attack Level” and “Decay
		Level” values in the range of –256 to 0 to +255. You can input a
		“Decay Time” in the range of 0 to 127.
		Attack Level, Decay Time, Decay Level
	Key Follow	Key follow. Adjusts the amount of pitch change between neighboring	–128 - 0 - +127
		keyboard keys. A higher value represents greater change.
	Key Follow Base	Key follow base. Keyboard key that is the center of key follow.	C- - G9
		Split shift. Counting from the keyboard key that is pressed, the
	Split Shift	waveform that sounds is the one assigned to the keyboard key that is	–12 - 0 - +12
		the specified split shift amount above or below the pressed key. The
		pitch used is the one that corresponds to the pressed keyboard key.
	LFO Layer Depth	LFO layer depth. Adjusts how LFO is applied to each layer.	0 - 127
		Filter. For details, see the melody tone “Filter” on page E-11.
		• For details about the setting items below, see the melody tone
		“Filter” on page E-11. You can input a value in the range from 0 to
		127.
Filter >Ent		Cutoff, Resonance, Attack Level, Envelope Depth
		• For details about the setting items below, see the melody tone “Pitch
		Envelope” on page E-11. You can input a value in the range from 0 to
		127.
		Initial Level, Attack Time
		Filter type. Specifies the range cut by the filter.
		LPF1: 6dB/oct filter for low-frequency band components. No
		resonance effect. Suitable for acoustic instruments.
		LPF2: 12dB/oct filter for low-frequency band components. No
		resonance effect. Suitable for acoustic instruments.
	Filter Type	LPF3: 12dB/oct filter for low-frequency band components. With	Refer to the cell to the left.
		resonance effect. Suitable for synthesized tones.
		BPF : 6dB/oct filter for band components in the vicinity of the cutoff
		frequency. With resonance effect.
		HPF : 12dB/oct filter for high-frequency band components. With
		resonance effect.
	Velocity Sense	Velocity sense. Specifies the degree of change in the filter in accordance	–64 - 0 - +63
		with keyboard press velocity.
	Decay 1 Time	Decay 1 time. Time it takes for the sound to reach the decay 1 level	0 - 127
		from the attack level.
	Decay 1 Level	Decay 1 level. Target level for change from the attack level up to the	0 - 127
		Decay 1 level.
	Decay 2 Time	Decay 2 time. Time it takes for the sound to reach the Decay 2 level	0 - 127
		from the Decay 1 level.
	Decay 2 Level	Decay 2 level. Second target level for change from Decay 1 level up to	0 - 127
		the Decay 2 level.

E-15