Casio PX-5S Settings, (BENDER), (NUM KEY), Description, Display Text, (MODULATION), (DAMPER/PEDAL 1)

Using the Stage Setups (Tutorial)

Display Text		Description	Settings
		Key Range High. Specifies the high range of the keyboard for each zone.
		This setting is used in combination with the Key Range Low setting to
	Key Range High	configure key ranges for each zone.	C- - G9
		• After pressing the en (NUM KEY) button to enter the number input
		mode, you can use the keyboard keys to enter values.
		Velocity range low. This is the minimum velocity value of each zone. This
	Velo.Range Low	setting is used in combination with the Velo.Range High setting below to	0 - 127
		configure velocity ranges for each zone.
	Velo.Range	Velocity range high. This is the maximum velocity value of each zone. This
		setting is used in combination with the Velo.Range Low setting above to	0 - 127
	High
		configure velocity ranges for each zone.
	Volume	Volume. This setting is the same as the mixer function part volume (page	0 - 127
		E-37).
	Pan	Panning. Adjusts the left-right position of sound in the stereo field. This	–64 - 0 - +63
		setting is the same as the mixer function part panning (page E-37).
	Coarse Tune	Coarse tune. Shifts the pitch of notes by semitone units.	–24 - 0 - +24
	Fine Tune	Fine tune. This setting is the same as the mixer function part fine tune (page	–99 - 0 - +99
		E-37).
	Bend Range	Bend range down. Pitch change amount for downward bender operation.	0 - 24
	Down
	Bend Range Up	Bend range up. Pitch change amount for upward bender operation.	0 - 24
	Chorus Send	Chorus send. This setting is the same as the mixer chorus send (page E-37).	0 - 127
	Delay Send	Delay send. This setting is the same as the mixer delay send (page E-37).	0 - 127
	Reverb Send	Reverb send. This setting is the same as the mixer reverb send (page E-37).	0 - 127
	Resonance Send	Resonance send. Enables/disables send to the resonance function of each	Off, On
		zone.
	Reso.Return	Resonance return level. This setting is the same as the mixer resonance	0 - 127
	Level	return (page E-37).
Controller Edit >Ent		Controller parameters. This is a group of editable controller parameters.
	Knob1 Enable	Knob 1 on/off (Knob 1 enable). Enables/disables 3 (K1) operation for each	Off, On
		zone.
	Knob2 Enable	Knob 2 on/off (Knob 2 enable). Enables/disables 3 (K2) operation for each	Off, On
		zone.
	Knob3 Enable	Knob 3 on/off (Knob 3 enable). Enables/disables 3 (K3) operation for each	Off, On
		zone.
	Knob4 Enable	Knob 4 on/off (Knob 4 enable). Enables/disables 3 (K4) operation for each	Off, On
		zone.
	Slider1 Enable	Slider 1 on/off (Slider 1 Enable). Enables/disables 4 (S1) operation for each	Off, On
		zone.
	Slider2 Enable	Slider 2 on/off (Slider 2 Enable). Enables/disables 5 (S2) operation for each	Off, On
		zone.
	Slider3 Enable	Slider 3 on/off (Slider 3 Enable). Enables/disables 6 (S3) operation for each	Off, On
		zone.
	Slider4 Enable	Slider 4 on/off (Slider 4 Enable). Enables/disables 7 (S4) operation for each	Off, On
		zone.
	Slider5 Enable	Slider 5 on/off (Slider 5 Enable). Enables/disables 8 (S5) operation for each	Off, On
		zone.
	Slider6 Enable	Slider 6 on/off (Slider 6 Enable). Enables/disables 9 (S6) operation for each	Off, On
		zone.
	Bender Enable	Bender on/off (bender enable). Enables/disables 1 (BENDER) operation	Off, On
		for each zone.
	Wheel Enable	Modulation wheel on/off (wheel enable). Enables/disables 2	Off, On
		(MODULATION) operation for each zone.
	Pedal1 Enable	Pedal 1 on/off (pedal 1 enable). Enables/disables operation of a pedal	Off, On
		connected to fk (DAMPER/PEDAL 1) for each Zone.

E-32